Often, yes, for a simple garment in one color, at a smaller factory, and at a higher unit price than a large order would get. A minimum order quantity (MOQ) exists mostly because of fabric minimums and fixed setup costs. To get a smaller order accepted, reduce what has to be set up just for you: use fewer colors, choose fabric the factory or mill already stocks, keep trims standard, and expect to pay more per piece.
What is an MOQ, and what does it apply to?
An MOQ is the smallest order a supplier will accept. The number on its own tells you little until you know what it counts. Ask the factory which one it means:
| The MOQ is counted per | What it means for a 200-piece order |
|---|---|
| Run or order | 200 pieces in total can meet it, even across several styles |
| Style | Each design must reach the minimum on its own |
| Color | Each color of each style must reach it |
| Size | Rare, but sometimes applied to unusual sizes |
Fabric, trims, labels, and printing can each have their own minimums too. A factory may accept 200 garments but still need you to buy a full fabric run or a minimum batch of custom labels. Ask for every minimum that applies to your order, not just the garment MOQ.
Why do clothing factories set minimums?
Some costs are the same whether the order is 200 pieces or 2,000, and the factory has to spread them over the pieces you buy.
| Cost | How it behaves | Effect on a small order |
|---|---|---|
| Fabric mill minimum | Mills often won't dye or knit a custom fabric below a set length or weight | The factory may have to buy more fabric than your order uses |
| Pattern making and grading | Done once per style | Higher cost per piece at low quantities |
| Line setup | Machines, workers, and quality standards are set up for each style | Same setup time for a short run, so less output per setup |
| Custom trims and labels | Suppliers have their own minimums | Leftover labels or trims you still pay for |
| Cutting and sewing labor | Charged per piece | Roughly the same per piece, but slower at the start of a run while workers learn the style |
Fabric is usually the biggest factor. If the factory has to order custom-dyed fabric, the mill's minimum, not the factory's, sets the floor. One sourcing company gives the example of a mill that needs about 500 meters to run a fabric.
Published mill terms show how large the gap between stock and custom fabric can be. Spiritex, whose organic cotton fabrics are spun, knit and finished by partner mills near Asheville, North Carolina, lists these minimums on its website (as of November 2026):
| Fabric option | Published minimum |
|---|---|
| Stock colors (black, natural, and white prepared for dyeing) | 1 yard |
| Custom color on an existing fabric | 7 rolls of solid color, about 210 to 560 yards depending on the fabric (about 240 yards for its medium-weight fleece) |
| Custom fabric knitted to your specification | 2,000 yards or more |
Other mills set different numbers, and mills in other countries often work in kilograms. The pattern is common, though: a custom color costs much more in minimum quantity than a stock color, and a custom fabric costs much more than either.
How do typical MOQs compare between countries?
Published ranges vary widely and depend on the garment, the fabric, and the factory's size. As one reference, a sourcing company that works in Asia reports these ranges, per style and per color:
| Country | Typical range reported | Smaller exceptions reported |
|---|---|---|
| Vietnam | 300 to 3,000 pieces | 200 to 500 at smaller factories, for simple items such as t-shirts |
| China | 500 to 5,000 pieces at large garment factories | 100 to 300 at small workshops in Guangzhou, with widely varying quality |
The same source says large Vietnamese suppliers to global brands usually start at 3,000 to 10,000 pieces. Treat all of these as rough orientation. Smaller workshops in the United States also take short runs, usually with higher labor costs per piece.
The practical point is that 200 pieces is below what most large factories accept, but within what many smaller factories and workshops will do.
How do 200 pieces split across sizes?
Two hundred pieces sounds like a lot until you split it. Here is one example split for a unisex top in sizes S to XXL. It's an illustration, not a recommended size curve:
| Size | S | M | L | XL | XXL | Total |
|---|---|---|---|---|---|---|
| One color | 30 | 60 | 60 | 35 | 15 | 200 |
| Two colors, each | 15 | 30 | 30 | 18 | 7 | 100 |
Adding a second color roughly halves every size. If the MOQ is counted per color, two colors also mean two fabric runs. A factory needs this split to quote at all; see what your tech pack needs before a factory will quote. For a first order, one color usually gives you more of each size, less leftover fabric, and a simpler negotiation.
How can a small brand get a factory to accept 200 pieces?
- Start with one color. It's the change that lowers the factory's fabric risk the most.
- Use stock fabric. Ask what fabric the factory or its mills already hold in the weight and fiber content you want. Fabric that's already made removes the mill minimum from the equation.
- Keep trims and labels standard. Standard drawcords, zippers, and printed care labels avoid separate minimums. Custom woven labels and dyed-to-match zippers often have minimums of their own.
- Ask for a price at your quantity. Many factories will make a smaller run for a small-order surcharge. Ask for the unit price at 200 and at the factory's normal MOQ, so you can see what the surcharge is.
- Ask whether the MOQ is per run. If it is, two styles in the same fabric may reach it together.
- Be honest about future volume. A factory may accept a small first order if your next orders are realistic. Stated growth that doesn't happen ends the relationship.
- Choose a factory sized for the order. A smaller factory or workshop is more likely to accept 200 pieces. Before you pay, check that it's really the factory doing the work. See How to Tell If a Clothing Supplier Is a Factory or a Trading Company.
How much more a small run costs depends on the garment, the fabric, and the factory, so there's no reliable general percentage. Published examples give a sense of scale. In one case reported by Maker's Row, an activewear founder asked a factory with a 300-unit minimum to make 150 and offered to pay more per unit. Her landed cost came out about $4 higher per unit, and she launched with about $6,000 less tied up upfront. The only way to know your own premium is to get prices at both quantities from the same factory. For what else goes into the unit price, see what goes into the cost of a heavyweight hoodie.
When is a custom 200-piece order the wrong first step?
A custom cut-and-sew run is not the only way to start. If your design is a basic shape and the value is in the graphic, buying blank garments and decorating them can test demand with less money tied up in fabric and setup. You give up control over fit and fabric, which is often the reason brands move to cut-and-sew later.
A custom run makes more sense when the fit, fabric, or construction is the reason customers buy from you, and a blank can't deliver it.
Sources
- What Does Minimum Order Quantity (MOQ) Mean in Manufacturing?, Cosmo Sourcing (accessed November 2026)
- Spiritex USA-made organic cotton fabric: ordering and minimums, Spiritex (accessed November 2026)
- What is MOQ? Complete Guide for Brand Owners, Maker's Row (accessed November 2026)