Most clothing goes through three main sample rounds before bulk production: a proto sample to check the design, one or more fit samples to get the measurements right, and a pre-production sample to confirm that the bulk order will be made exactly as approved. Each round has a different job, so check different things each time. Trying to settle everything on the first sample usually adds rounds instead of saving them.
What sample rounds are there?
Factories and brands use slightly different names. These are the common ones:
| Round | Purpose | Usually made in |
|---|---|---|
| Proto sample | Turn the tech pack into a first physical garment | Substitute fabric is often accepted |
| Fit sample | Correct the fit and measurements on the base size | The right fabric, or one very close to it |
| Size set | Check that grading works across the size range | Bulk fabric if available |
| Pre-production (PP) sample | Confirm everything before bulk: fabric, color, trims, labels, construction | Bulk fabric and bulk trims |
| Top of production (TOP) sample | Check garments pulled from the start of the bulk run | Bulk production |
Small orders often skip the size set, or combine the fit and PP rounds when the fit is already right. Skipping a round saves time only if nothing changes afterward.
What should you check on a proto sample?
The proto shows whether the factory understood the design. Focus on the overall look and construction:
- Is the silhouette right: length, width, sleeve shape, hood shape?
- Are the details in the right place: pockets, seams, labels, print position?
- Is the construction what the tech pack says, such as the seam types and how the cuffs are attached?
- Is anything missing or added?
If the factory used substitute fabric, don't judge drape, weight, or color on the proto. Note anything that the real fabric might change.
What should you check on a fit sample?
The fit sample is about measurements and how the garment sits on a body.
- Measure it. Measure each point of measure in your spec and record the result next to the target and the tolerance.
- Try it on a real person whose body matches your base size. A garment can measure correctly and still fit badly, for example with a hood that pulls the neckline back.
- Move in it. Raise the arms, sit down, bend over. Check where it pulls, gaps, or rides up.
- Wash it, if you can spare a second sample, and measure again. Shrinkage that shows only after washing is a common cause of complaints.
Change only what needs changing. Every measurement you adjust can affect others, so focus on the fit problems you saw.
What should you check on a pre-production sample?
The PP sample is the reference for the bulk order. The factory will produce to match it, and you will inspect against it. Check that everything is final:
- Fabric: the bulk fabric, in the approved color, matching the approved lab dip
- Trims: the actual drawcords, eyelets, zippers, and thread colors for bulk
- Labels: neck label, care label, and any hang tags, with correct content and position
- Decoration: print or embroidery on bulk fabric, in the right size, colors, and position
- Measurements: within tolerance, including any fit changes from the last round
- Packaging: folding and bagging, if you asked for it to be shown
Sign off in writing. Keep one approved PP sample yourself, and ask the factory to keep a sealed one as well. If bulk goods differ from it, the approved sample is your evidence.
How do you write sample comments a factory can act on?
Clear comments save a round. Vague ones cost one.
| Instead of | Write |
|---|---|
| "Body feels too big" | "Chest width 62 cm, target 58 cm. Reduce to 58 cm, tolerance ±1 cm." |
| "Hood looks odd" | "Hood height 3 cm too tall at center back. See photo with marked line." |
| "Print is wrong" | "Print placed 12 cm below the neck seam. Target is 8 cm. Width correct." |
| "Change the color" | "Body color doesn't match the lab dip approved on the stated date. Match the lab dip." |
Add photos with the problem marked, and number every comment. Ask the factory to reply to each number, so nothing is lost between rounds.
Who pays for samples?
Practices vary. Many factories charge for samples, especially for new customers and small orders, and some credit sample fees against the bulk order once it is placed. Ask before the first sample: what each round costs, whether freight is included, and whether fees are credited later. Sample shipping by express courier can cost more than the sample itself, and since 2025 even low-value sample shipments into the United States are subject to duties (how to estimate landed cost).
How many rounds should you expect?
It depends mostly on how complete the tech pack is and how much the design changes between rounds. A simple style with a complete tech pack may need only a fit sample and a PP sample. A new fit, a new fabric, or design changes after the first sample each add a round. Plan your launch date with at least one extra round, because one usually happens.
Sources
- What Is a Tech Pack?, Techpacker
- Indefinite Suspension of the De Minimis Exemption, Federal Register, June 24, 2026